Carbide Burs • Precision ground tungsten carbide tips, silver brazed to a hardened steel shank. • Excellent in hard-to-reach areas or confined spaces. Ideal for shaping and enlarging holes, removing welds and smoothing castings. Double Cut Series for Steel and Stainless Steel With its chisel tooth cutting pattern, double cut burs produce small,distinct granular chips instead of long, sharp slivers. Eliminates loading of the bur's flutes and minimizes chatter. This is the most popular, smoothest cutting style. Ideal on steel, stainless steels, alloys and exotics. DIMENSIONS Spaenaur Dia. x Length x Shank No. Cylinder 1/2" x 1" x 1/4" 876-2008 Ball Nose Cylinder 1/4" x 5/8" x 1/4" 876-2011 Ball 1/4" x 3/16" x 1/4" 876-2017 3/8" x 5/16" x 1/4" 876-2018 1/2" x 7/16" x 1/4" 876-2020 Oval 1/4" x 3/8" x 1/4" 876-2023 1/2" x 7/8" x 1/4" 876-2025 Use on Die Grinders All Burs on this page are for Grinding ONLY DIMENSIONS Spaenaur Dia. x Length x Shank No. Round Nose Tree 1/4" x 5/8" x 1/4" 876-2027 Pointed Tree 1/4" x 5/8" x 1/4" 876-2033 3/8" x 3/4" x 1/4" 876-2034 1/2" x 1" x 1/4" 876-2035 Ball Nose Cone 1/4" x 5/8" x 1/4" 876-2037 3/8" x 1-1/16" x 1/4" 876-2038 1/2" x 1-1/8" x 1/4" 876-2039 Pointed Cone 1/4" x 1/2" x 1/4" 876-2041 3/8" x 5/8" x 1/4" 876-2042 1/2" x 7/8" x 1/4" 876-2043 DIMENSIONS Spaenaur Dia. x Length x Shank No. Round Nose Tree 3/8" x 3/4" x 1/4" 876-2029 1/2" x 1" x 1/4" 876-2031 Aluminum Cut with 1/4" Shank The authentic milling cutter style flute assures fast chip flow and extremely fast stock removal. These burs are ideal on aluminum, nonferrous metals, reinforced plastics and other soft materials. DIMENSIONS Spaenaur Dia. x Length x Shank No. Cylinder 3/8" x 3/4" x 1/4" 876-2007 1/2" x 1" x 1/4" 876-2009 Ball Nose Cylinder 3/8" x 3/4" x 1/4" 876-2013 1/2" x 1" x 1/4" 876-2015 DIMENSIONS Spaenaur Dia. x Length x Shank No. Pointed Cone 1/8" x 7/16" x 1/8" 876-2040 Miniature Burs with 1/8" Shank These right hand spiral burs are ideal on high tensile steel, dies, casts and other tough materials. Ideal for deburring, beveling and chamfering. DIMENSIONS Spaenaur Dia. x Length x Shank No. Ball Nose Cylinder 1/8" x 9/16" x 1/8" 876-2010 Carbide burs are cutting tools, not abrasives. Burs are designed to cut with one side only. Do not jam the bur into a tight corner or cavity. Doing so will force the bur to cut in all sides, and will overload and overheat the bur causing it to fail. All items on this page PKG QTY. 1 CATALOG 14 P P : 1-800-265-8772 F : 1-888-252-6380 www. .com Inch Pouce Carbide Burs P111 19 jan 2018 Fraises en carbure F : 1- 8-252-6380 service@spaenaur. © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue.
RkJQdWJsaXNoZXIy NzkyNDk4