P Wire Wheel Brushes Use on Angle Grinders For Cleaning & Conditioning Carbon Wire .020 General purpose wire for cleaning and deburring. DIMENSIONS MAX Face Dia. x Width x Arbor RPM CARBON WIRE 6-1/2" x 1/4" x 5/8"-11 12,000 876-2045 Stringer Bead Wire Wheels Narrow work face allows for easy access to confined areas. Ideal for weld and bead cleaning on pipes and vessels. Wire Wheel Brushes Carbon Wire .014, .020 General purpose wire for cleaning and deburring. DIMENSIONS MAX Face Dia. x Width x Hole Sizes RPM CARBON WIRE 6" x 1" x 5/8" and 1/2" 6,000 876-2055 8" x 1" x 5/8" and 1/2" 4,500 876-2056 Crimped Wire Wheel Brushes Use on Bench Grinders For Cleaning & Conditioning Wire Cup Brushes Carbon Wire .014 General purpose wire for cleaning and deburring. Crimped Wire Cups DIMENSIONS MAX CARBON WIRE Dia. x Thread RPM .014 .020 2-3/4" x 5/8"-11 12,500 876-2047 — 2-3/4" x M14-2.0 12,500 876-2048 — 5" x 5/8"-11 7,000 — 876-2049 Use on Angle Grinders For Cleaning & Conditioning DIMENSIONS MAX CARBON WIRE STAINLESS WIRE Dia. x Thread RPM .020 .020 2-3/4" x 5/8"-11 12,500 876-2050 — 3" x 5/8"-11Knock-Off Bridle 11,000 876-2057 876-2058 4" x 5/8"-11Knock-Off Bridle 8,500 876-2051 — 5" x 5/8"-11Knock-Off Bridle 8,500 876-2052 876-2053 6" x 5/8"-11Knock-Off Bridle 6,500 876-2054 — Knotted Wire Cups Knotted - Knotted wire cup brushes are perfect for heavy duty cleaning and rough scale removal. Knotted - Knock-Off Bridle Bridles restrain the knots, providing flare control and prevent premature wire breakage. As the brush wears down removing the bridle will expose new wire. Use on Angle Grinders For Cleaning & Conditioning Type 1 cutoff wheels must be mounted between properly relieved flanges of equal diameter and matching bearing surfaces. Such flanges must be at least 1/4 of the wheel diameter. Do not use this flange assembly with wheels larger than 5" diameter. Right angle grinders may not come equipped with Type 1 flanges as standard equipment. Reuseable Flange Assembly Kit, consists of backing flange and centre nut/flange. 876-2060 1-3/4"Dia. x 5/8-11 Arbor For use with 4-1/2" and 5" diameter thin* cutoff wheels on angle grinders. Can be used with Type 1 or Type 27 thin* cutoff wheels. *Wheel Thickness .045" thru 1/8" All items on this page PKG QTY. 1 CATALOG 14 P P : 1-800-265-8772 F : 1-888-252-6380 www. .com Inch Pouce Wire Wheel Brushes / Flange Kits P110 Machine Guard Spacer/Washer* Backing Flange Center Nut/Flange Type 1 Thin Cutoff Wheel Type 27 Thin Cutoff Wheel *Spacer/Washer may be needed to ensure proper tightening of wheel. 19 Jan 2018 Roues brosses métalliques / Kits de brides F : 1- 8-252-6380 service@spaenaur © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue.
RkJQdWJsaXNoZXIy NzkyNDk4