CATALOG 14 M P : 1-800-265-8772 F : 1-888-252-6380 www. .com Inch Pouce Standardized Brass Eyelets & Fastener Tools M32 01 AUG 2019 Œillets en laiton standardisés et outils de fixation Rolled Flange Head Eyelets Adaptable as rivets, reinforcements, pivots, bushings, vents, etc. Widely used in electronics parts assemblies. Brass Eyelets See page M30 for additional styles. Special Size PKG QTY. 100 SPAENAUR No. Barrel Material Finish Eyelet Diameter Length Flange Dia. Remarks GE-28 Brass Plain 11/64" 7/8" 3/8" Flat Flange - 104-C02-1T Aluminum Plain 9/32" 3/16" 1/2" PKG QTY. 100 Coil/Grip Ranges: No two applications being alike, it’s impossible to offer specific standards as to how much barrel length there should be to obtain proper coil/grip. Too much length can result in barrel buckling (collapsing). Too little may mean loss of grip strength. Rigid materials usually need less; soft flexible materials will need more, as a wide coil (to grip more material) is desirable. If parts fastened are exposed to unusual stresses, extra length is usually desirable, even though materials may be rigid in nature. As a general guide in preliminary selection, the following should be helpful: Eyelet Diameter: 3/64” to 1/16” 3/32” to 1/8” 5/32” to 3/16” 5/32” to 3/16” 1/4” or more Additional Length: 1/32” 1/16” 3/32” 3/32” 1/8” EYELET TOLERANCES: Length Under Flange ± .002" Eyelet Diameter ± .005" Flange Diameter ± .005" Eyelet Diameter Flange Diameter Material Thickness Barrel Length Spaenaur No. Eyelet Diameter Flange Diameter Material Thickness Barrel Length Spaenaur No. 2/32" E-22 3/32" E-63 3/32" E-23 4/32" E-64 4/32" E-24 5/32" E-65 5/32" E-25 6/32" E-66 6/32" E-26 7/32" E-67 7/32" E-27 8/32" E-68 3/32" E-33 9/32" E-69 4/32" E-34 10/32" E-610 5/32" E-35 11/32" E-611 6/32" E-36 12/32" E-612 7/32" E-37 13/32" E-613 3/32" E-43 3/32" E-73 4/32" E-44 4/32" E-74 5/32" E-45 5/32" E-75 6/32" E-46 6/32" E-76 7/32" E-47 7/32" E-77 8/32" E-48 8/32" E-78 9/32" E-49 9/32" 104-C03-1K 10/32" E-410 10/32" E-710 11/32" E-411 11/32" E-711 12/32" E-412 12/32" E-712 3/32" E-53 3/32" E-83 4/32" E-54 4/32" E-84 5/32" E-55 5/32" E-85 6/32" E-56 6/32" E-86 7/32" E-57 7/32" E-87 8/32" E-58 8/32" E-88 9/32" E-59 9/32" E-89 10/32" E-510 10/32" E-810 11/32" E-511 11/32" E-811 12/32" E-812 13/32" E-813 0.150" 0.105" 0.246" Table Continues 0.011" 0.385" 0.340" 0.290" 0.245" 0.200" 0.007" 0.009" 0.0095" 0.010" 0.0105" 0.011" 0.215" 0.059" 0.089" 0.121" 0.152" 0.183" Flange Diameter Eyelet Diameter Barrel Length F : 1- 8-252-6380 service@spaenaur © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. CATALOG 14.04 2019/08/08
RkJQdWJsaXNoZXIy NzkyNDk4