CATALOG 14 L P : 1-800-265-8772 F : 1-888-252-6380 www. .com Inch Pouce Latch & Lock Parts / Door Hold-Backs L64 The flexibility of the wire rope compensates for any misalignment between the holdback hook and the keeper. SPAENAUR Mfr. Rope Mounting No. No. Length holes Particulars 099-061 5601-1/2-E1 4" 0 No retainer spring in keeper Flexible Wire Rope DOOR HOLD BACK For holding doors open against side of body. Hook manually engaged and disengaged. DOOR HOLDER POSITIVE DOOR HOLDER Zinc Plated 1-3/4" overall width of hook keeper back plate 3" overall length hook and keeper back plate 1 x 2-5/16" centres of mounting holes on hook and keeper 5/16" overall height of hook assembly 23/32" overall height of keeper assembly 3-3/4" length of hook 1/8" thickness of mounting flanges 13/64" diameter of mounting holes 7 oz. weight each 1-3/4" width of hook and keeper mounting plate 3" overall length of hook and keeper mounting plate 1 x 2-5/16" centres of mounting holes on hook and keeper 9/16" overall height of hook assembly 3/4" overall height of keeper assembly 4" length of hook 1/8" thickness of mounting flange on female keeper 3/16" thickness of mounting flange on hook 13/64" diameter of 8 mounting holes 11 oz. weight each The D-4019 Positive Door Holder was designed for heavy duty use. Its rugged steel construction incorporates a flat hook retaining spring which prevents the malleable hook from accidently bouncing out of the female keeper. 099-109 Stainless Steel Prepolished Dimensions: 2" overall width Keeper assembly: 3-1/4" overall length 1-3/4" overall width 4-1/2" eye extension 2-1/2" overall length Zinc Plated 1/4" Holes Has Drop-Forged Hook-and-Eye Pieces 2-7/16" Spotweld 23/32" 3/4" 4 Holes 7/32" Dia. 9/16" 1-5/16" 1-3/4" 2-1/4" 7/8" 1-1/4" Max. 1/2" Inside Slam Latch Shown with knob and “nose-down” bolt. Specifications HEAVY DUTY 099-183 STEEL Yellow Zinc Dichromate Finish Plastic Pull-Knob Release STEEL Zinc Plated Finish (Mfr. No. 5600U) D-4019 (Mfr. No. 5601-1/2U) Finish – Zinc Plated D-3196 D-4051 DOOR HOLDER 3/4" overall height of keeper assembly 4" length of hook 1/8" thickness of mounting flanges 13/64" diameter of mounting holes 5 oz. weight each 1-3/4" overall width of hook keeper back plate 3" overall length hook and keeper back plate 1 x 2-5/16" centres of mounting holes on hook and keeper 3/8" overall height of hook assembly Sturdy stainless steel hook and keeper. When mounted, holds door open firmly clamped to the side. Hook and Keeper D-3196K Keeper only. PKG QTY. 1 PKG QTY. 1 PKG QTY. 1 PKG QTY. 1 PKG QTY. 1 19 Jan 2018 SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. POSITIVE DOOR HOLDER PKG QTY. 1 Pièces pour loquets et verrous / retenues de porte F : 1- 8-252-6380 service@spaenaur © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue.
RkJQdWJsaXNoZXIy NzkyNDk4