CATALOG 14 L P : 1-800-265-8772 F : 1-888-252-6380 www. .com Inch Pouce Cam Locks & Latches L10 1-5/32" 1" 3/4" 3/4" 3/16" 5/8" .377" RAD. .653" FIXING HOLE DIMENSIONS DIA. To order Master Keys andfor Additional data see Page L2. SPAENAUR No. For Material Thickness .024"-.048" .048"-.072" .073"-.080" Description D-1411 D-1412 D-1413 Cam lock, with 2 keys, all to differ. D-1411KA 096-H07-1N D-1413KA Cam lock, with 2 keys, all keyed alike. D-1411MK D-1413MK Cam lock, master keyed, with 2 keys, all to differ. 1" 5/8" 1-5/32" 1" SPRING STEEL HOLDING CLIP 3/4" DIA. 3/4" NOMINAL 3/16" .653" .377" RAD. FIXING HOLE DIMENSIONS D-1411,-12-13 Series CAM LOCKS For steel cabinets, lockers, drawers, office equipment, control panels, vending machines, meters, etc. Featuring attractive square escutcheon design. 3/4" long under escutcheon to locking cam. Locking cams can be assembled in four different positions by the user: 90 ° -180 ° -270 ° -360 ° . Standard straight cam as shown. (Other cams available to special order.) 180 ° movement of key one way, either clockwise or anti-clockwise as required, key being free in both positions. (Other movements available to special order.) FIXING: The lock is fixed by means of a double pronged spring clip, specially designed to permit secure fixing by the quickest possible means and without having to take off the locking cam. The lock is offered to a fixing hole (formed to the dimensions on the drawing) and pushed home. The lock can be used on any material thicknesses from .024" to .080". ( .61mm to 2.03mm ). A special removal tool may be supplied if required (to special order). ZINC BASE DIE-CASTINGS Chrome Plated Finish Cam will fit Cam Lock Series: D-1411, See this page. D-1414, on following page. D-3006, See this page. 110-154, See page L13. ZINC BASE DIE-CASTINGS Chrome Plated Finish To order Master Keys and for Additional data see Page L2. D-3006 Series CAM LOCKS For steel and wooden cabinets, lockers, drawers, office furniture and equipment, cubicles, control panels, vending machines, meters, etc. Manufactured to English standards. 3/4" long under escutcheon to locking cam. Locking cams can be assembled in four different positions by the user: 90 ° -180 ° -270 ° -360 ° . Standard straight cam as shown. (Other cams available to special order). 90 ° clockwise movement of the key from the locked position. Key is retained in lock in unlocked position. (Other movements available to special order.) SPAENAUR No. Description 096-H08-1T Cam lock, with 2 keys, all to differ. 096-H06-1C Cam lock, with 2 keys, all keyed alike. D-3006MK Cam lock, master keyed, with 2 keys, all to differ. 110-155 SPAENAUR No. 30° 19/64" 1-3/16" 39/64" 3/16" 7/32" 5/32" Cam thickness 5/64 " Fits 5/16" sq. shaft Straight Notched Cam Steel, Heat Treated, Zinc (Yellow) Plated Series 92 Series 92 PKG QTY. 1 PKG QTY. 1 PKG QTY. 10 28 JUL 2020 Serrures et loquets à came F : 1- 8-252-6380 service@spaenaur © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue. L CAT LOG 14.08
RkJQdWJsaXNoZXIy NzkyNDk4