CATALOG 14 G P : 1-800-265-8772 F : 1-888-252-6380 www. .com Inch and Metric Pouce et Métrique Snap-Grip Hose Clamps G7 19 JAN 2018 Test Unit of Property Method Measure Nylon 6/6 Water Absorption D570 24 hrs., % 1.1 Flammability Rating/ Thickness 501R ssendraH 26007E eliF draC wolleY .L.U UL Continuous w/impact 75 Use Temperature w/o impact 85 Test Unit of Property Method Measure Nylon 6/6 Tensile Strength at Yield D638 psi 9,000 Elongation at Fail D638 % 200 Flexural Modulus D790 psi 190,000 Izod Impact D756 ft.-lb./in. 3.0 Deflection Temperature D648 66 psi °F 430 Deflection Temperature D648 264 psi °F 160 Dielectric Strength D149 Volts/Mil 550 Volume Resistivity D257 ohm/cm 2 x 1013 RAW MATERIAL SPECIFICATIONS UL94 in. V-2/.028 °C @.058 Install by hand in seconds — Strong yet lightweight A non-metallic clamp that will not rust, is non-conducting, not corroded by sea-water, and is stable in a wide variety of chemical salts, bases, alcohols, oils, and grease, gasoline, etc. NYLON 6/6 HOSE CLAMPS CORROSION-RESISTANT Natural Colour (White) SPAENAUR PKG D egnaR pmalC .rfM No. No. Inch Min.-Max. ±.01 Metric Min.-Max. ±.25 mm Clamp Width QTY. 078-A04-1Y 16 .246 - .290 6.25 - 7.37 7/32" (5.56 mm) 100 078-A02-1A 23 .360 - .406 9.14 - 10.31 7/32" (5.56 mm) 100 078-003 26 .410 - .468 10.41 - 11.89 1/4" (6.35 mm) 100 078-004 30 .475 - .536 12.07 - 13.61 7/32" (5.56 mm) 100 078-005 32 .538 - .608 13.67 - 15.44 1/4" (6.35 mm) 100 078-006 38 .597 - .665 15.16 - 16.89 1/4" (6.35 mm) 100 078-007 44 .670 - .780 17.02 - 19.81 7/32" (5.56 mm) 100 078-A01-1X 50 .720 - .825 18.54 - 21.08 7/32" (5.56 mm) 100 078-009 56 .870 - .975 22.10 - 24.77 7/32" (5.56 mm) 100 078-010 62 .953 - 1.094 24.21 - 27.76 5/16" (7.94 mm) 50 078-011 68 1.031 - 1.188 26.19 - 30.15 5/16" (7.94 mm) 50 078-A03-1P 250 1.250-1.425 31.75 - 36.20 5/16" (7.94 mm) 25 078-013 92 1.406 - 1.610 35.71 - 40.89 11/32" (8.73 mm) 25 078-014 104 1.594 - 1.813 40.46 - 46.02 11/32" (8.73 mm) 25 078-015 114 1.790 - 2.110 45.47 - 53.59 11/32" (8.73 mm) 25 078-016 124 1.870 - 2.125 47.50 - 53.98 13/32" (10.32 mm) 10 078-017 134 2.120 - 2.390 53.85 - 60.71 13/32" (10.32 mm) 10 These clamps are applied by a quick ratchet closure, even after the hose is in place. A lateral effort disengages the clamps. NYLON 6/6: Nylon resins are resistant to a variety of organic and inorganic substances. They are not affected by aliphatic and aromatic hydrocarbons, including conventual fuel. Nylon resins are also resistant to a wide variety of organic compounds including aldehydes, ketones, mono-hydroxyl alcohols, most esters and most chlorinated aliphatic and aromatic materials. Organic materials whichdoaffect nylon includephenols, formicacid, trichloroaceticacid, fluroalcohols, acetic acid and other organic acids. Salts, such as calcium chloride, calcium bromide and similar materials should be avoided, especially at high concentration and temperature. NOTE: These RawMaterial Specifications shall not be construed as creating an express warranty of description. The specifications are approximate and intended to serve only as guides and not as the basis of any sale, agreement or contract of any goods sold by SPAENAUR Inc. Dia. Range D Pat. No. 4,128,918 Colliers de serrage verrouillage à dents F : 1- 8-252-6380 service@spaenaur. © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue.
RkJQdWJsaXNoZXIy NzkyNDk4