CATALOG 14 E P : 1-800-265-8772 F : 1-888-252-6380 www. .com Inch Pouce Retaining Ring Tools E141 INTERCHANGEABLE POINTS Order by COMPLETE type number as listed below. 876-523 TIPS ONLY for use with Pliers T-3000 876-767 TIPS ONLY for use with Pliers 876-757 lanretxE lanretnI Retaining Ring Retaining Ring sreilP sreilP 0003-T seziS gniR rof "05.9-"05.3 757-678 seziS gniR rof "00.01-"57.6 MAJOR and SUPER MAJOR Sizes - For the REALLY BIG ONES INTERCHANGEABLE POINTS RANGES Complete with one T-447 Point range 5 pairs. Complete with one T-447 Point range 5 pairs. Pliers 6-5/8" long Pliers 6-5/8" long. For EXTERNAL Rings up to approx. 1-1/2" shaft dia. REGULAR SIZE - FOR MOST POPULAR RING SIZES T-445. . Internal Snap Ring Pliers T-446 . . External Snap Ring Pliers One plier for internal snap rings; another for external. Using different types and sizes of interchangeable points, a wide range of application is provided. Hexagonal points are automatically aligned and secured in hexagonal shaped jaws, secured by a round head screw in each tempered jaw plate...they cannot twist. Points are highest quality tool steel, accurately machined and tempered. PLIERS for EXTERNALTYPE RINGS PLIERS for INTERNALTYPE RINGS For INTERNAL Rings up to approx. 2" housing diameter Effortless SingleHanded Assembly SERIES T-449P For use in either T-445, T-446, or T-446X. Hex shapes automatically aligned and locked in hex jaws of pliers. Can’t turn! Tips ground with slight reverse taper for more secure grip in ring hole. .039 point identified by plain shank. .047 point identified by one notch on shank. .074 point identified by two notches on shank. .090 point identified by three notches on shank. SERIES T-459P Hex shaped - cannot twist because they are automatically aligned and secured in hex jaws of the pliers. A round head screw on each tempered jawplate locks points in place. Point tips are ground with slight reverse taper for more secure grip in ring holes. T-459P-108-15 (Point diameter .108", angle 15°) T-459P-108-45 (Point diameter .108", angle 45°) T-459P-123-45 (Point diameter .123", angle 45°) .108" Point identified by plain shank .123" Point identified by one notch on shank T-449P-039-15 (Point diameter .039", angle 15°) T-449P-074-15 (Point diameter .074", angle 15°) T-449P-039-45 (Point diameter .039", angle 45°) T-449P-074-45 (Point diameter .074", angle 45°) T-449P-090-45 (Point diameter .090", angle 45°) T-449P-039-90 (Point diameter .039", angle 90°) T-449P-047-90 (Point diameter .047", angle 90°) T-449P-074-90 (Point diameter .074", angle 90°) TYPE NO. 15° Angle 45° Angle Note: Applicator Tools for RADIAL Assembly on page E126 90° Angle 19 Jan 2018 PKG QTY. 1 PKG QTY. 1 PKG QTY. 1 1 pair of one type. PKG QTY. 1 1 pair of one type. PKG QTY. 1 1 Set - 2 Tips PKG QTY. 1 PKG QTY. 1 5 pairs points in plastic box. One pair each of the following: Point dia. - .039", angle 15° Point dia. - .047", angle 15° Point dia. - .074", angle 15° Point dia. - .039", angle 45° Point dia. - .047", angle 90° T-447 - for use in pliers T-445 644-T dna PKG QTY. 5 PAIRS SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. SPAENAUR No. Outils pour bagues de retenue F : 1- 8-252-6380 service@spaenaur. © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue.
RkJQdWJsaXNoZXIy NzkyNDk4