CATALOG 14 C P : 1-800-265-8772 F : 1-888-252-6380 www. .com Hex Projection Weld Nuts / Round Pilot Weld Nuts / Square Weld Nuts Metric Métrique C47 A B H D E *F Coarse SPAENAUR Width Across Min. Width Projection Pilot Pilot Thread Size No. Flats Across Corners Thickness Height Height Diameter M3 x 0.50 208-001 7.5 8.15 3.0 0.25 0.55 4.5 M4 x 0.70 208-002 9.0 9.38 3.5 0.35 0.65 6.0 M5 x 0.80 208-003 10.0 10.95 4.0 0.40 0.70 7.0 M6 x 1.00 208-004 11.0 12.02 5.0 0.40 0.75 8.0 M7 x 1.00 208-005 12.0 13.9 5.5 0.45 0.80 9.0 M8 x 1.25 208-006 14.0 15.38 6.5 0.50 0.90 10.5 M10 x 1.50 208-007 17.0 18.74 8.0 0.65 1.15 12.5 M12 x 1.75 208-K17-1W 19.0 20.91 10.0 0.80 1.40 14.8 M14 x 2.00 208-009 22.0 24.27 11.0 1.00 1.80 16.8 M16 x 2.00 208-010 24.0 26.51 13.0 1.00 1.80 18.8 METRICHEXAGON WELD NUTS DIN 929 SPAENAUR No. *Hole Min. lenaP eziS esraoC Thread Copper Pltd. Stainless T C E A in ThickSize STEEL Steel 302 Max. Max. Max. Sheet ness M3 x 0.50 208-050 1.5 4.35 7.95 0.76 4.40 0.77 M4 x 0.70 208-051 208-801 2.6 5.50 9.55 0.76 5.55 0.77 M5 x 0.80 208-052 208-802 3.8 6.30 11.10 0.76 6.35 0.77 M6 x 1.00 208-053 208-803 4.6 8.00 13.20 1.24 8.05 1.25 All Dimensions in millimetres Pilot-projection Weld Nuts provide load bearing threads in sheets too thin to thread. Engineered projections - no burnouts in thin sheets. Round body - no indexing. Fits on narrow flanges. Selflocating pilot. Shank protects threads from weld splatter. No retapping. Thread fits areMetric 6H METRIC SIZES *(+0.00) All Dimensions in millimetres Steel (max. carbon content 0.25%) Plain Finish 4 Weld Projections SQUARE WELD NUTS All dimensions in millimetres Self-colour METRICSIZES ROUND PILOT WELD NUTS SHORT PILOT Copper Plated STEEL C-1015 and STAINLESS STEEL 302 DIN 928 Coarse Thread SPAENAUR Width Across Min. Width Thick- Projection Size No. Flats Across Corners ness Height M5 x 0.80 208-045 9 12 4.2 0.8 M6 x 1.00 208-046 10 13 5 0.8 M8 x 1.25 208-K08-1A 14 18 6.5 1 M10 x 1.50 208-049 17 22 8 1.2 M12 x 1.75 208-048 19 25 9.5 1.4 Steel (max. carbon content 0.25%) 3-PROJECTION TYPE *Pilot hole is to H11 tolerance PKG QTY. 100 PKG QTY. 100 PKG QTY. 100 18 Jan 2018 Écrous hexagonaux à souder par bossage / Écrous de montage ronds / Écrous à souder carrés F : 1- 8-252-6380 service@spaenaur. © 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc. Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. © 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc. L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la fin de ce catalogue.
RkJQdWJsaXNoZXIy NzkyNDk4